Delivery program

Basic function	Basic device
Product function	Installation distribution boards
Product range	BF flat DBO
Design	Surface mounted
Installation site	Indoor
Type of installation	Surface mounting
Door/Flap	Gray
Degree of Protection	IP30
Colour	Grey
Module rack	Rail-frame
Shroud for protection against accidental contact	Metal
Rows [Count]	2
Module units per row	24
Description	IP30Protection Class ISteel sheet enclosure grey (RAL 7035)
Cable entries	Cable entries on top and bottom
PE and N terminals design	Screw terminals
PE and N terminals [Number x cross-sectional area]	PE: 2 x 25 + 43 x 16N: 2 x 25 + 43 x 16 mm2
Equipment supplied	EnclosureDoor with three-point turn-lockDIN rail mounting frameCable gland plate inserts (top)Front platesNeutral-/protective conductor terminal

Technical data

General
Standards	IEC/EN 61439-1, IEC/EN 61439-3, IEC/EN 62208
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and Council)	conform
Ambient temperature	-5 - +40 °C
Degree of Protection	IP30
Protection class	I (earthed)
Rated operational voltage [Ue]	415 V AC
Rated frequency [f]	50/60 Hz
Material characteristics
Material	Sheet steel, powder-coated
Colour	Gray (RAL 7035)
Material properties
MechanicalImpact resistance	IK07

Design verification as per IEC/EN 61439

Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 Individual enclosure for wall mounting [PV]	37 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 Starting enclosure for wall mounting [PV]	36 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 Middle enclosure for wall mounting [PV]	34 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 Individual enclosure for wall mounting [PV]	75 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 Starting enclosure for wall mounting [PV]	72 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 Middle enclosure for wall mounting [PV]	69 W
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation	Not relevant to indoor installations.
10.2 Strength of materials and parts10.2.5 Lifting	Does not apply to enclosures without lifting aids.
10.2 Strength of materials and parts10.2.6 Mechanical impact	IK07
10.2 Strength of materials and parts10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES	IP30
10.4 Clearances and creepage distances	Is the panel builder's responsibility.
10.5 Protection against electric shock	< 0.1 Ω; meets the product standard's requirements.
10.6 Incorporation of switching devices and components	Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength	Ui = 415 V AC
10.9 Insulation properties10.9.3 Impulse withstand voltage	Does not apply to basic enclosures as defined in EN 62208.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material	Does not apply to metal enclosures.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	Meets the product standard's requirements.

Technical data ETIM 7.0

Distribution boards (EG000023) / Small distribution board (EC000214)
Electric engineering, automation, process control engineering / Electrical installation, device / Electrical distribution system (incl. small distribution board) / Small distribution board (ecl@ss10.0.1-27-14-24-09 [ACN387011])
Mounting method	Surface mounted (plaster)
Number of rows	2
Width in number of modular spacings	24
Type of cover	Door
Cover model	Closed
Transparent cover/door	No
Material housing	Steel
Height	450 mm
Width	543 mm
Depth	140 mm
Built-in depth	140 mm
Internal depth	131 mm
DIN-rail	Yes
With mounting plate	No
Extension possible	No
EMC-version	No
Colour	Grey
RAL-number	7035
Degree of protection (IP)	IP30
With lock	No
Type of closure	Other

Dimensions

Height H [mm] = 450

BF-O-2/48-G-C; Распределительный шкаф EATON; арт. 113686